KleenGrow disrupts cellular membranes which provides broad spectrum control.
Yes, it will control all microbes on hard surfaces and on plants upon contact.
KleenGrow has residual up to 30 days on a hard surface, therefore it continues to control microbes and algae. Bleach dissipates quickly without residual microbial control. It also takes up 8oz/gal of bleach for effective hard surface control, but only 1 oz/gal of KleenGrow.
We have created a chart to explain KleenGrow rates and REI below:
|48 HR||0.06 to 0.38||Spray or drench application over crops for disease control|
|12 HR||0.03 to 0.20||Intermittent chemigation for disease control on crops|
|0 HR||0.003 to 0.014||Continuous chemigation- for water borne pathogen control|
|0 HR||0.12 to 2.0||Hard Surface Cleaning & Disinfection|
Yes, there are specific rates for each use:
Yes, KleenGrow can be used to disinfect indoor and greenhouse growing areas for all crops including flowers, vegetable, herbs, and hemp. For packing areas, KleenGrow can be used at 200ppm on surfaces that come in contact with produce.
While wearing appropriate protective equipment, apply foam to surfaces in a greenhouse that need cleaning or inject into irrigation lines to remove mineral build-up. Be sure to cover plants to protect them. Always make sure to flush irrigation lines until the pH returns to normal, and pressure rinse with water to remove Strip-It Pro from all surfaces.
Horti-Klor is an alkaline cleaner and Strip-It Pro and acid cleaner. Horti-Klor can be used indoors and outdoors, while Strip-It Pro can only be used in greenhouses or outdoors.
Pace Solutions Corp.
1597 Derwent Way, Delta, BC Canada V3M 6K8
(604) 520-6211 (800) 799-6211 (604) 521-5927
For more ways to get in touch with Pace locally, visit our Contact Us page to find your regional representative.Contact Us