Legionella Management

Managing the Risk

Legionella risk management is important in preventing the bacteria that causes Legionnaires’ disease. By using effective treatment programs and services, Pace helps you with microbial control while improving public safety.

Have a question?

Risk Management Programs

Our focus is educating and assisting our clients to minimize the risk for Legionella bacteria in their cooling water systems by recommending the implementation of best practices based upon industry standard guidelines.

What is Legionella?

Legionella is the bacteria that causes Legionnaires’ Disease, a deadly respiratory infection that leads to severe pneumonia-like symptoms. Commonly found in stagnant water at temperatures between 20°- 50°C (68º – 122º F), it thrives in biofilm, scale, and sediment.

Legionella can survive chlorinated potable water by living in certain amoeba and ciliated protozoa, allowing them to appear in finished water supplies to homes, buildings and industrial sites.

Legionella In Buildings

The most common outbreaks of Legionella have occurred in buildings and facilities with mismanaged systems. Areas in buildings where the bacteria thrive are:

Related Article

Preventing Legionella in High Traffic Public Spaces

After a long closure due to the pandemic, an indoor public ice rink in the Greater Toronto Area (GTA) in Ontario, Canada, experienced a potential legionella outbreak. 

Minimizing the Risk of Legionella

The water treatment objectives are to prevent corrosion, scale deposits, pipe fouling, and microbiological control.

Pace Legionella Policy Guideline “Legionella Risk Management of Cooling Water Systems” covers:

Since there is no guarantee to eliminate the health risk associated with Legionella bacteria or any potential outbreaks in cooling water systems, our primary focus is to educate and help our clients minimize the risk for Legionella in their cooling water system(s) by recommending they implement all best practices, many which are outlined in our Pace Legionella Policy Guideline.  Examples of topics covered in our policy include:

If you would like more information on how to implement the Pace Legionella Policy Guideline for your cooling tower management plan, please contact us at the Pace Legionella Team.

Related Article

Testing and Treating Water for Legionella

Energy saving additives for hydronic systems are the simplest way to instantly reduce building energy consumption and emissions by up to 15%.

Testing for Legionella

As per the Public Works and Government Services Canada (PWGSC) Document MD 15161 2013, Pace recommends that Legionella sampling and testing should be done monthly on cooling tower systems, or more frequently if the weekly TBC bacterial counts are excessively high or if heavy biofouling is evident in the cooling tower system. Pace utilizes an independent CALA Accredited and CDC Elite Certified Laboratories for Legionella Analysis using ISO 11731 methodology for culture testing method.

Pace Solutions also provides rapid on-site DNA detection of Legionella bacteria. This testing service will provide highly accurate qPCR analysis in 45 minutes, compared to waiting weeks with the standard culture test method.  Unlike lab-based qPCR methods, this proprietary technology detects live and not dead bacteria, utilizing a test method that is validated according to ISO 12869. This DNA-based diagnostic technique allows Pace to provide their clients with;

For more information on how Pace can implement DNA detection of Legionella at your site(s), contact the Pace Legionella Team.

Related Article

Vancouver Legionella Testing Bylaw Compliance

Let Pace Manage Your Cooling Tower Operating Permit, Legionella Testing and EOCP Certification!

Developing a Water Management Plan (WMP)

We will help you create and implement a compliant, comprehensive, and defensible Legionella WMP. Then we’ll provide support and service for ongoing compliance. The Pace WMP and service will:

Pace has also partnered with HC Info which provides a cloud-based application (LAMPS) for water management plans, analytics, and training. LAMPS is used to minimize the risk of disease caused by Legionella and other harmful bacteria emitted from water systems in hospitals, nursing homes, hotels, and other large buildings.  Pace customers receive a partner code discount from HC Info for their LAMPS Water Management Plans.

Application

Standing Water & Legionella Exposure

Standing water at the building’s cooling tower were exposed to conditions during the spring and summer ripe for potentially developing a legionella outbreak. Concerns over the wellbeing of building occupants and possible health violations required immediate action.

Pace Water Management Plan (WMP)

Using modern testing technology returning results in less than an hour, technicians quickly identified problem zones and treated the system. Since legionella thrives in the biofilm and silt found in standing water, Pace specialists created a solution that not only applied biocides and bio-dispersants but included a WMP.

Safe & Compliant Energy Efficient Operations

Scale deposits were removed, corrosion was treated and a WMP for ongoing microbiological control was implemented. The result was a safe HVAC system with less downtime, improved energy efficiency and a service schedule that ensured compliant operations.

Resources

FAQ

What is Legionella?

Legionella pneumophila is a very common organism, capable of being present in appreciable numbers in almost all ground and surface water sources. Legionella tend to grow in biofilms or slime on the surfaces of lakes, rivers and streams and very adaptively, within water distribution systems such as cooling towers and evaporative condensers. The mere presence of Legionella does not by itself result in infectious disease. However, when certain Legionella multiply, (increase in population density) and transmit to a susceptible human host, they can cause Legionellosis infections.

Can proper treatment eliminate the risk of Legionella?

No, treatment will not eliminate the risk but it can certainly minimize the risk of legionella. Small amounts of legionella pneumophila can be present in the water supply so chemical treatment alone cannot completely eliminate all risk. Treatment is designed to minimize the risk by preventing legionella from multiplying within the cooling tower, decreasing the likelihood of transmission to people.

Do we need to test our cooling tower for Legionella?

Yes it is recommended. Sampling and testing for Legionella is useful in helping assess risks and in determining whether or not preventative and corrective measures are working. Having an action plan based upon results of Legionella sampling can alert you to increased risks and whether or not decontamination procedures should be implemented. There is no risk for Legionnaires Disease if there is no Legionella. The only practical way to know if you have Legionella is to test for it.

As per the Public Works and Government Services Canada (PWGSC) Document MD 15161 2013, Pace recommends that Legionella sampling and testing should be done monthly, or more frequently if the weekly TBC bacterial counts are excessively high or if heavy biofouling is evident in the cooling tower system.

Pace utilizes an independent CALA Accredited and CDC Elite Certified Laboratories for Legionella Analysis using ISO 11731 methodology for culture testing method.

Additionally, Pace provides real-time DNA testing services for Legionella using qPCR ISO 12869 methodology, which can be particularly beneficial to detect the immediate presence of Legionella bacteria. The qPCR testing method is also recommended following the cleaning/sanitization and decontamination procedures.

What water systems can Legionella grow in?

According to the Centre for Disease Control, Legionella can become a health concern when it grows and spreads in human-made building water systems like;

  • Showerheads and sink faucets
  • Cooling towers (structures that contain water and a fan as part of centralized air cooling systems for building or industrial processes)
  • Hot tubs that aren’t drained after each use
  • Decorative fountains and water features
  • Hot water tanks and heaters
  • Large plumbing systems
Do we need a Water Management Plan (WMP) for our building?

The CDC recommends the development and implementation of a Water Management Plan to minimize the spread of legionellosis for all applicable water systems in a building. This includes buildings that have water systems such as;

  • Domestic hot water tank and system
  • Hot tubs and spas
  • Ornamental fountains
  • Humidifiers, Misters, air washers
  • Other non-potable water systems
  • Cooling tower systems

To determine what water systems in your building should be included in your Building Water Management Plan, click on our ASHRAE 188-2021 Summary Technical Bulletin which outlines the applicable systems by conducting a survey of the building’s risk factors.

Library

SDS Request Form

    SDS Request


    Quick Contact

    Fill out this form and we'll get back to you very shortly.

    For more ways to get in touch with Pace locally, visit our Contact Us page.



      TOP